High Power Small Size 593.5nm Orange Laser 300mW
2.Plug & play
4.Many wavelengths available
6. Can be equipped with software
2.Laser medical treatment
Fiber core diameter: ¡Ý200¦Ìm
All lasers are made with FC or SMA905 connectors
Standard length of a fiber is 1 m or 2 m, other lengths available on request.
Control interface type: RS232 or USB
Optimum heatsink temperature (non-condensing): +8.5…+30℃
Max. heatsink temperature 40¡æ
Internal temperature stabilization: TEC
Overheat protection: Yes
1. This is a custom laser.
2. $100 is the deposit, not the final price of this laser.
3. Please contact us and tell us your all parameter reqirements,then we can offer you a quotation based on your needs.
|Product Name||593.5nm Orange Laser|
|Output power (mW)||300|
|Spectral linewidth||0.2nm FWHM (typical)|
|Noise of amplitude(rms,20Hz~20MHz)||3%|
|Beam divergence, full angle (mrad)||<1|
|Beam diameter at the aperture (1/e2 , mm)||~3|
|Beam height from base plate (mm)||12|
|Polarization ratio||better than 100:1|
|Warm-up time (minutes)||<5|
|Operating temperature (¡æ)||10~35|
|Storage temperature (¡æ)||-10~50|
|Power supply (100-240VAC)||+12VDC, 16.7A for DPSS (with driver)|
|Modulation||DPSS lasers : 0~30kHz TTL pin|
|Expected lifetime (hours)||10000|
|Warranty period||1 year|