Your cart is empty

Low Cost Long Lifetime 660nm High Stability DPSS Red Laser 1~100mW

Price: $100.00


Low Cost Long Lifetime 660nm High Stability DPSS Red Laser 1~100mW

1.Ultra compact
2.Long lifetime
3.Low cost
4.Easy operating

2.Spectrum analysis
3.Laser lighting show

1. This is a custom laser.
2. $100 is the deposit, not the final price of this laser.
3. Please contact us and tell us your all parameter reqirements,then we can offer you a quotation based on your needs.


Product Name 660nm High Stability Red Laser
Model MRL-III-660
Wavelength (nm) 660±1
Output power (mW) >1,5,10,20,…, 100
Operating mode CW
Transverse mode Near TEM00
Power stability (rms, over 4 hours) <5%,<10%
M 2 factor <1.2
Beam divergence, full angle (mrad) <1.5
Beam diameter at the aperture (1/e2 , mm) ~1.2
Beam height from base plate (mm) 24.8
Polarization ratio >100:1 (0 or 90 degree)
Pointing stability after warm-up (mrad) <0.05
Warm-up time (minutes) <10
Operating temperature (℃) 10~35
Modulation option TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option
Expected lifetime (hours) 10000
Warranty period 1 year

This is 660nm laser, we can provide other models of customization, the following is a list of specific models.


Laser Type Model Output Power(mW)
Single Longitudinal Mode Laser at 660nm MSL-FN-660 1~20
MSL-FN-660 1~20
Low Noise Red Laser at 660nm MLL-III-660 1~100
MLL-FN-660 100~400
High Stability Red Laser at 660nm MRL-III-660 1~100
MRL-FN-660 200~400
MRL-N-660 500~1000
MRL-W-660 1000~2000
Q-switched Red Laser at 660nm MPL-III-660 1~5
MPL-H-660 5~10
HPL-660-Q 2~5mJ/ 20~50W
HPL-660-QM 10mJ/ 50~100W
Fiber Coupled Laser System at 660nm MRL-660(FC) 1~1500
FC-660 1~300
660nm High Stability Red Laser  1~100mW

660nm High Stability Red Laser  1~100mW

LiveZilla Live Chat Software