Low Cost Easy Operating 680nm Low Noise Red Diode Laser 1~800mW
Features:
1.Ultra compact
2.Long lifetime
3.Cost-effectiveness
4. Easy operating
Applications:
1.Measurement
2.Specturm analysis
3.Laser lighting show
Note:
1. This is a custom laser.
2. $100 is the deposit, not the final price of this laser.
3. Please contact us and tell us your all parameter reqirements,then we can offer you a quotation based on your needs.
SPECIFICATIONS:
Product Name | 680nm Low Noise Diode Laser | |
Model | MLL-III-680 | |
Wavelength (nm) | 680±5 | |
Output power (mW) | >1,100,200,…, 800 | |
Transverse mode | Multimode | |
Operating mode | CW | |
Power stability (rms, over 4 hours) | <1%, <3%, <5% | |
Noise of amplitude(rms,20Hz~20MHz) | <1% | |
Beam divergence, full angle (mrad) | <3.0 | |
Beam diameter at the aperture (1/e2 , mm) | ~5×8 | |
Beam height from base plate (mm) | 24.8 | |
Warm-up time (minutes) | <5 | |
Operating temperature (¡æ) | 10~35 | |
Power supply(85-264VAC) | PSU-III-LED/ PSU-III-FDA | |
TTL / Analog modulation | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional | |
Expected lifetime (hours) | 10000 | |
Warranty period | 1 year |
This is 680nm laser, we can provide other models of customization, the following is a list of specific models.
MODEL OPTION:
Laser Type | Model | Output Power(mW) |
Low Noise Red Laser at 680nm | MLL-III-680 | 1~800 |
High Stability Red Laser at 680nm | MRL-III-680 | 1~800 |
MRL-III-680R | 1~200 | |
Fiber Coupled Laser System at 680nm | MRL-680(FC) | 1~800 |
FC-680 | 1~800 |