All solid state 266 nm UV laser is made features of ultra compact, long lifetime, low cost and easy operating, which is widely used in UV curing, micro-electronics, CD carving, laser medical treatment, scientific experiment, etc.
Specification:
| Central wavelength (nm) | 266±1 | |
| Output average power (mW) | 30mw | |
| Transverse mode | Near TEM00 | |
| Operating mode | Frequency conversion of Q-switched pulsed laser | |
| Single pulse energy (µJ) | 0.1~5 | |
| Pulse duration (ns) | ~5 | |
| Peak power (KW) | ~0.7 | |
| Rep. rate (kHz) | FIXED | Setting up one fixed rep. rate internal between 1k-4kHz with stable pulse energy, pulse duration and pulse period. |
| EXT TRIG | 1kHz-4kHz by external trigger with stable pulse energy, pulse duration and pulse period. | |
| QCW | QCW state with one rep. rate between 5k-7kHz. | |
| Average power (mW) | Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) | |
| Ave power stability (over 4 hours) | <5%, <10% | |
| Warm-up time (minutes) | <10 | |
| M2 factor | <1. 5 | |
| Spectral purity | >99% | |
| Beam parameters | Elliptical (4:1), Beam spot ~2mm | |
| Polarization ratio | >100:1 | |
| Beam height from base plate (mm) | 45 | |
| Operating temperature (℃) | 10~35 | |
| Power supply (90-264VAC) | PSU-H-FDA | |
| Expected lifetime (hours) | 5000 | |
| Warranty period | 1 year | |
| Remarks | Please Note: because of the Walk-off effect of Nonlinear crystals, the beam quality of UV laser is not so good as that of 1064/532nm laser. | |
Similar products
-

UV Laser 266nm 30mw Ultraviolet Laser
$19,539.00



.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)

Follow us on Twitter
Facebook page
NakuLaser YouTube